Hi Oleg,

Thanks for the response, I thought it is was probably OK, just checking. The thing is we can't check before we buy we 
just have to jump in and take the hit.

Regards,
Pete

-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com] 
Sent: 06 November 2017 21:08
To: general-qnx4@community.qnx.com
Subject: Re: Siemens IPC347E

Hi Pete,

It seems that the IPC347E based on Intel H61, so it should be works fine with the latest QNX 4 Install CD Experimental 
2015. But it’s better to check the PC before purchasing if possible.

Respectfully,
Oleg

3 нояб. 2017 г., в 19:46, Pete Mackereth <community-noreply@qnx.com> написал:

> Hello,
> 
> I am thinking of using the Siemens IPC347E with QNX 4.25, any ideas if there will be any issues, here is the link ...
> 
> https://w3.siemens.com/mcms/pc-based-automation/en/industrial-pc/rack-pc/simatic-ipc347e/Pages/Default.aspx
> 
> See also attached config details.
> 
> Thanks,
> Pete
> 
> 
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post118180
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
> <Spec.png>





_______________________________________________

General
http://community.qnx.com/sf/go/post118185
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com