Mike,

The only thing that I see that is common between the Ethernet controller
and the video controller, is the IRQ 11. Is there a setting in the BIOS of
your machine where you can change the IRQ of either the video controller
or the Ethernet controller so that they are not on the same IRQ?

Thanks, Hugh.




On 2016-05-31, 8:58 AM, "Constanzo, Michael" <community-noreply@qnx.com>
wrote:

>Hugh:
>
>	1. If you are running in text mode, does the lockup still occur, or only
>when running Photon?
>	
>		Yes it occurs in either mode.
>	
>	2. Does the lockup only occur while starting the driver or does the
>lockup remain once the network driver is running?
>
>		Once you start Net.rtl8169, if the video cable is unplugged the server
>will lock up, before this diver is started the video will not lock up if
>you pull the video cable.
>
>	
>Thanks
>
>Mike  
>
>
>-----Original Message-----
>From: Hugh Brown [mailto:community-noreply@qnx.com]
>Sent: Monday, May 30, 2016 10:55 AM
>To: general-qnx4@community.qnx.com
>Subject: Re: Net.rtl8169 and Video lockup
>
>If you are running in text mode, does the lockup still occur, or only
>when running Photon? Does the lockup only occur while starting the driver
>or does the lockup remain once the network driver is running?
>
>
>
>On 2016-05-27, 9:49 AM, "Constanzo, Michael" <community-noreply@qnx.com>
>wrote:
>
>>
>>The video will lock up in either environment, in the council
>>environment before starting Photon and in Photon as well.  I have tried
>>both the Pg.flatdc and Pg.flated32.
>>
>>-----Original Message-----
>>From: Олег Большаков [mailto:community-noreply@qnx.com]
>>Sent: Friday, May 27, 2016 6:25 AM
>>To: general-qnx4@community.qnx.com
>>Subject: Re: Net.rtl8169 and Video lockup
>>
>>Hi Michael,
>>
>>Do you launch Photon graphics? What graphics driver do you use? Please
>>send me output of following commands:
>>
>>show_pci -vvv
>>sin irq
>>sin arg
>>sin ver
>>
>>Respectfully,
>>Oleg
>>
>>25 мая 2016 г., в 17:26:38, Michael Constanzo
>><community-noreply@qnx.com>
>>написал:
>>
>>> Group:
>>> 
>>> I have a Dell T20 with an rtl8169 network card  I am running qnx4.25
>>>on the system work fine but if the video cable is pulled out it locks
>>>up the server.  I have been able to track the lock up to the starting
>>>of the Network driver Net.rtl8169.  Before the network driver is
>>>started you can unplug and plug in the video but after you start the
>>>driver the server will lock once unplugged.
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> 
>>> General
>>> http://community.qnx.com/sf/go/post116333
>>> To cancel your subscription to this discussion, please e-mail
>>>general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>>_______________________________________________
>>
>>General
>>http://community.qnx.com/sf/go/post116347
>>To cancel your subscription to this discussion, please e-mail
>>general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>_______________________________________________
>>
>>General
>>http://community.qnx.com/sf/go/post116349
>>To cancel your subscription to this discussion, please...