This is the usual question that arises as time passes and old applications remain the same - New Hardware compatibility. We're evaluating two boards for their suitability to run QNX4.25 I have the following evaluation units: GENE-LN05 Rev. B for AEC-6612 Rev. B (ICH8M chipset) http://www.aaeon.com/en/p/3-and-half-inch-sbc-gene-ln05-rev-b/ http://www.aaeon.com/en/p/fanless-embedded-computers-aec-6612-rev-b/ GENE-CV05 for AEC-6613 (Intel NM10 chipset) http://www.aaeon.com/en/p/3-and-half-inch-sbc-gene-cv05/ http://www.aaeon.com/en/p/fanless-embedded-computers-aec-6613/ Using the latest install from http://www.qnx.com/download/feature.html?programid=22480 which is the ISO 2011 product suite I am getting crashes starting the Fsys.atapi and io-usb on both systems. Results for the LN05 Fsys.atapi crash on start is D1:40B io-usb crash on start is D1:40B Results for the CV05 Fsys.atapi crash on start is D1:43B io-usb crash on start is D1:43B I did this all again direct from the install CD (above tests were done from boot images on SSD and USB) Versions running are: Proc32 4.25Q Slib 4.24B Photon 4.14B phfontphf 4.14H Dev 4.23G Dev.pty 4.23G Input 4.25C The results were the same. I favor the LN05 but include the CV05 results in case the different address helps identify the fault. I am looking for tweaks, ideas, unreleased patches? And Suggestions. Thanks Rob
OK - the process of self help - worked. http://community.qnx.com/sf/frs/do/viewRelease/projects.qnx4/frs.utilities.proc32 This Proc32 seems to have resolved the issues. Thanks All. Regards Rob
