Project Home
Project Home		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
QNX RTOS v4 [EOL]/Discussion/General/Net.e1000 and PCI device 0x1502/List of Posts
Forum Topic - Net.e1000 and PCI device 0x1502: (9 Items)
   
Update
Klaus Pantleon(deleted)
08/24/2011 11:17 AM
post88319
Net.e1000 and PCI device 0x1502   
Dear QNX4 supporters,

does someone already had the Intel Gigabit Chip with PCI device ID 0x1502 tested with Net.e1000?
I have an actual Lenovo T520 laptop in front of me with exactly these network chip.
When I look inside the Net.e1000 driver with spatch it seems that these device ID should be supported.
I'm using the Net.e1000 from May 2011 and  the driver seems to start ("-vvv" output) but there is an error message:
"ERROR: Flash registers not mapped
NVM Initialization Error"

br,
Klaus
Hugh Brown
08/24/2011 11:44 AM
post88320
Re: Net.e1000 and PCI device 0x1502   
The driver needs to be updated, so once it is updated I¹ll send you a new
version.


On 11-08-24 11:17 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

> Dear QNX4 supporters,
> 
> does someone already had the Intel Gigabit Chip with PCI device ID 0x1502
> tested with Net.e1000?
> I have an actual Lenovo T520 laptop in front of me with exactly these network
> chip.
> When I look inside the Net.e1000 driver with spatch it seems that these device
> ID should be supported.
> I'm using the Net.e1000 from May 2011 and  the driver seems to start ("-vvv"
> output) but there is an error message:
> "ERROR: Flash registers not mapped
> NVM Initialization Error"
> 
> br,
> Klaus
> 
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post88319
> 
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited.   (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
Hugh Brown
08/24/2011 1:51 PM
post88325
Re: Net.e1000 and PCI device 0x1502   
Please try the attached driver and let me know if it works.

Thanks, Hugh.


On 11-08-24 11:17 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

> Dear QNX4 supporters,
> 
> does someone already had the Intel Gigabit Chip with PCI device ID 0x1502
> tested with Net.e1000?
> I have an actual Lenovo T520 laptop in front of me with exactly these network
> chip.
> When I look inside the Net.e1000 driver with spatch it seems that these device
> ID should be supported.
> I'm using the Net.e1000 from May 2011 and  the driver seems to start ("-vvv"
> output) but there is an error message:
> "ERROR: Flash registers not mapped
> NVM Initialization Error"
> 
> br,
> Klaus
> 
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post88319
> 
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited.   (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
Attachment: Text Net.e1000 244.7 KB
Klaus Pantleon(deleted)
08/25/2011 4:35 AM
post88343
Re: Net.e1000 and PCI device 0x1502   
Thanks Hugh for the fast response!!

the driver is starting up correctly and I see the MAC using 'netmap' and 'netinfo -L1'.
But there are no packages going out on the ethernet interface. I see no packets using 'netinfo -L1'  and also using 
netinfo the 'Media Rate' is '0'.

On a PC connected directly to the QNX node I see also no packets using automap or entering a MAC address in the netmap 
and make a sin to that node number.

br,
Klaus
Klaus Pantleon(deleted)
08/25/2011 4:45 AM
post88345
Re: Net.e1000 and PCI device 0x1502   
If I slay and restart the Net.e1000 there is following error message coming:
MDI write did not complete
PHY Initialization Error
init_phy_params failed

br, Klaus
Hugh Brown
08/25/2011 7:35 AM
post88347
Re: Net.e1000 and PCI device 0x1502   
OK, I¹ll take a look at it and get back to you.

Thanks, Hugh.


On 11-08-25 4:45 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

> If I slay and restart the Net.e1000 there is following error message coming:
> MDI write did not complete
> PHY Initialization Error
> init_phy_params failed
> 
> br, Klaus
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post88345
> 
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited.   (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
Hugh Brown
08/30/2011 9:22 AM
post88498
Re: Net.e1000 and PCI device 0x1502   
Please try the attached driver and let me know if it works OK.

Thanks, Hugh.


On 11-08-25 4:45 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

> If I slay and restart the Net.e1000 there is following error message coming:
> MDI write did not complete
> PHY Initialization Error
> init_phy_params failed
> 
> br, Klaus
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post88345
> 
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited.   (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
Attachment: Text Net.e1000 158.61 KB
Klaus Pantleon(deleted)
08/31/2011 8:52 AM
post88527
Re: Net.e1000 and PCI device 0x1502   
Thanks Hugh for the driver update.

I tested today and it seems to work. Even netinfo shows all necessary information.

Klaus
Hugh Brown
08/31/2011 8:54 AM
post88528
Re: Net.e1000 and PCI device 0x1502   
Good news!

Thanks, Hugh.


On 11-08-31 8:53 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

> Thanks Hugh for the driver update.
> 
> I tested today and it seems to work. Even netinfo shows all necessary
> information.
> 
> Klaus
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post88527
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited.   (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems