Project Home
Project Home
Wiki
Wiki
Discussion Forums
Discussions
Project Information
Project Info
Forum Topic - Intel 945GME graphics support: (3 Items)
   
Intel 945GME graphics support  
Hi,

  I have problems getting any QNX Windows graphics driver working with the Intel 945GME chipset (pci vendor 0x8086, 
device 0x27ae) in a computer we are evaluating. Even the standard gr.vga fails when attempting to switch to graphics 
mode - that one usually works at 640x480 at least.
  For gr.vga in verbose mode, I get the following error messages:
  ...
  Requested Video Mode 1 by 71
  Send to Int10 or SetMode failed
  Send to Int10 or SetMode failed
  Send to Int10 or SetMode failed
  Reply with error: 5
  ...

  For gr.phi with Pg.i830, I just get a blank screen.

  Any idea what could be the problem? I have attached output from show_pci.
Attachment: Text enix3000.txt 36.94 KB
Re: Intel 945GME graphics support  
I do not know what the problem is, other than stating the obvious - your card is not supported by the available drivers.


As far as what you can do about it... 
We have no plans currently for a QNX Windows drivers update -  your only option is to contact your QNX sales team and 
discuss custom engineeirng.

-Martin.

Re: Intel 945GME graphics support  
> I do not know what the problem is, other than stating the obvious - your card 
> is not supported by the available drivers.
> 
> As far as what you can do about it... 
> We have no plans currently for a QNX Windows drivers update -  your only 
> option is to contact your QNX sales team and discuss custom engineeirng.
> 
> -Martin.
 
Fair enough. It turned out to be an issue with the specific BIOS version used on that computer, an upgrade to a newer 
version resolved the problem.

Best Regards,
  Christian Friberg