Project Home
Project Home		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Graphics/Discussion/Advanced Graphics/Poulsbo and screen resiolution/List of Posts
Forum Topic - Poulsbo and screen resiolution: Page 1 of 2 (27 Items)
   
Update
Christophe Hannoyer
01/15/2010 11:42 AM
post45314
Poulsbo and screen resiolution   
Hi,

On my system (see attached get_hw_info) I'm using the devg-poulsbo.so as video driver.
http://www.qnx.com/developers/docs/6.4.1/neutrino/utilities/d/devg-poulsbo.so.html

It works fine with a resolution of 1024 x 768. But if I tried to set the resolution to 1280 x 1024 it failed and go back
 to 1024 x 768.
See all messages at the end of the sloginfo but the most important seems to be:

/usr/photon/bin/io-graphics: gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2

Any idea why this error occurs?

Thanks,
Christophe
Attachment: Text hw-info-localhost_4.txt 58.28 KB
Michael Van Reenen
01/18/2010 12:39 PM
post45412
RE: Poulsbo and screen resiolution   
Hi,

Can you tell us what board this is and what type of display you are
using?

Can you exit to text mode and run 'show_vesa' and post the output?

Thanks
 

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: January 15, 2010 11:43 AM
To: advanced-graphics
Subject: Poulsbo and screen resiolution

Hi,

On my system (see attached get_hw_info) I'm using the devg-poulsbo.so as
video driver.
http://www.qnx.com/developers/docs/6.4.1/neutrino/utilities/d/devg-pouls
bo.so.html

It works fine with a resolution of 1024 x 768. But if I tried to set the
resolution to 1280 x 1024 it failed and go back to 1024 x 768.
See all messages at the end of the sloginfo but the most important seems
to be:

/usr/photon/bin/io-graphics:
gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2

Any idea why this error occurs?

Thanks,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post45314
Christophe Hannoyer
01/19/2010 5:51 AM
post45456
Re: RE: Poulsbo and screen resiolution   
Hi,

Thanks for the reply.

The board:
http://www.men.de/products/15MM01-.html

The display it's a BENQ FP91G+.

And the show_vesa is attached to this message.

Christophe Hannoyer
Attachment: Text show_vesa_1.txt 23.61 KB
Christophe Hannoyer
01/19/2010 8:49 AM
post45470
RE: Poulsbo and screen resiolution   
Hi,

Thanks for the reply.

The board:
http://www.men.de/products/15MM01-.html

The display it's a BENQ FP91G+.

And the show_vesa is attached to this message.

Christophe Hannoyer

> -----Message d'origine-----
> De : Michael Van Reenen [mailto:community-noreply@qnx.com]
> Envoyé : lundi 18 janvier 2010 18:40
> À : advanced-graphics
> Objet : RE: Poulsbo and screen resiolution
> 
> 
> Hi,
> 
> Can you tell us what board this is and what type of display you are
> using?
> 
> Can you exit to text mode and run 'show_vesa' and post the output?
> 
> Thanks
> 
> 
> -----Original Message-----
> From: Christophe Hannoyer [mailto:community-noreply@qnx.com]
> Sent: January 15, 2010 11:43 AM
> To: advanced-graphics
> Subject: Poulsbo and screen resiolution
> 
> Hi,
> 
> On my system (see attached get_hw_info) I'm using the devg-poulsbo.so as
> video driver.
> http://www.qnx.com/developers/docs/6.4.1/neutrino/utilities/d/devg-pouls
> bo.so.html
> 
> It works fine with a resolution of 1024 x 768. But if I tried to set the
> resolution to 1280 x 1024 it failed and go back to 1024 x 768.
> See all messages at the end of the sloginfo but the most important seems
> to be:
> 
> /usr/photon/bin/io-graphics:
> gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2
> 
> Any idea why this error occurs?
> 
> Thanks,
> Christophe
> 
> 
> 
> _______________________________________________
> 
> Advanced Graphics
> http://community.qnx.com/sf/go/post45314
> 
> 
> 
> _______________________________________________
> 
> Advanced Graphics
> http://community.qnx.com/sf/go/post45412
Attachment: Text show_vesa_1.txt 23.61 KB
Michael Van Reenen
01/19/2010 9:45 PM
post45520
RE: Poulsbo and screen resiolution   
I believe with this setup the driver will end up trying to use the video BIOS to set the graphics mode. (in particular 
sDVO output likely to DVI or VGA)

The output of show_vesa lists 1024x768 but not 1280x1024 which is the issue.

Unfortunately with the current driver there is no way to override using of the BIOS.  We hope to address this in a 
future release.



-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: January 19, 2010 8:50 AM
To: advanced-graphics
Subject: RE: Poulsbo and screen resiolution

Hi,

Thanks for the reply.

The board:
http://www.men.de/products/15MM01-.html

The display it's a BENQ FP91G+.

And the show_vesa is attached to this message.

Christophe Hannoyer

> -----Message d'origine-----
> De : Michael Van Reenen [mailto:community-noreply@qnx.com]
> Envoyé : lundi 18 janvier 2010 18:40
> À : advanced-graphics
> Objet : RE: Poulsbo and screen resiolution
> 
> 
> Hi,
> 
> Can you tell us what board this is and what type of display you are
> using?
> 
> Can you exit to text mode and run 'show_vesa' and post the output?
> 
> Thanks
> 
> 
> -----Original Message-----
> From: Christophe Hannoyer [mailto:community-noreply@qnx.com]
> Sent: January 15, 2010 11:43 AM
> To: advanced-graphics
> Subject: Poulsbo and screen resiolution
> 
> Hi,
> 
> On my system (see attached get_hw_info) I'm using the devg-poulsbo.so as
> video driver.
> http://www.qnx.com/developers/docs/6.4.1/neutrino/utilities/d/devg-pouls
> bo.so.html
> 
> It works fine with a resolution of 1024 x 768. But if I tried to set the
> resolution to 1280 x 1024 it failed and go back to 1024 x 768.
> See all messages at the end of the sloginfo but the most important seems
> to be:
> 
> /usr/photon/bin/io-graphics:
> gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2
> 
> Any idea why this error occurs?
> 
> Thanks,
> Christophe
> 
> 
> 
> _______________________________________________
> 
> Advanced Graphics
> http://community.qnx.com/sf/go/post45314
> 
> 
> 
> _______________________________________________
> 
> Advanced Graphics
> http://community.qnx.com/sf/go/post45412





_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post45470
Christophe Hannoyer
01/20/2010 10:33 AM
post45544
RE: Poulsbo and screen resiolution   
Hello Michael,

Thank you for your reply.

Only to know you are involved in this driver development?

Anyway waiting for a new release fixing this I will also tried to see with the BIOS developer to know if he can fixed 
this at the BIOS level.

We will see which of these two solutions will be available first.

Regards,
Christophe Hannoyer


> -----Message d'origine-----
> De : Michael Van Reenen [mailto:community-noreply@qnx.com]
> Envoyé : mercredi 20 janvier 2010 03:45
> À : advanced-graphics
> Objet : RE: Poulsbo and screen resiolution
> 
> 
> I believe with this setup the driver will end up trying to use the video BIOS
> to set the graphics mode. (in particular sDVO output likely to DVI or VGA)
> 
> The output of show_vesa lists 1024x768 but not 1280x1024 which is the issue.
> 
> Unfortunately with the current driver there is no way to override using of the
> BIOS.  We hope to address this in a future release.
Christophe Hannoyer
03/15/2010 12:37 PM
post49496
Re: RE: Poulsbo and screen resiolution   
Hello,

I create an image with a small demo running Photon. I run this image without any problem on an Atom Z530. A customer is 
using this image on an Atom Z510 and he get the error :
/usr/photon/bin/io-graphics: gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2
when starting io-graphics.

I attach to this post the show_vesa. I notice some difference with the previous I posted here but I don't know if thias 
can explain that.

Any idea ?

Thanks,
Christophe
Attachment: Text show_vesa_2.txt 39.66 KB
Michael Van Reenen
03/15/2010 1:28 PM
post49499
RE: RE: Poulsbo and screen resiolution   
What resolution and color depth are they trying to run at? 

Thanks
Mike

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: March 15, 2010 12:37 PM
To: advanced-graphics
Subject: Re: RE: Poulsbo and screen resiolution

Hello,

I create an image with a small demo running Photon. I run this image
without any problem on an Atom Z530. A customer is using this image on
an Atom Z510 and he get the error :
/usr/photon/bin/io-graphics:
gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2 when starting
io-graphics.

I attach to this post the show_vesa. I notice some difference with the
previous I posted here but I don't know if thias can explain that.

Any idea ?

Thanks,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post49496
Christophe Hannoyer
03/16/2010 4:43 AM
post49570
Re: RE: RE: Poulsbo and screen resiolution   
Hello Mike,

Thank you for the reply. They try to run at 1024x768 rgb565.

Regards,
Christophe

> 
> What resolution and color depth are they trying to run at? 
> 
> Thanks
> Mike
> 
> -----Original Message-----
> From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
> Sent: March 15, 2010 12:37 PM
> To: advanced-graphics
> Subject: Re: RE: Poulsbo and screen resiolution
> 
> Hello,
> 
> I create an image with a small demo running Photon. I run this image
> without any problem on an Atom Z530. A customer is using this image on
> an Atom Z510 and he get the error :
> /usr/photon/bin/io-graphics:
> gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2 when starting
> io-graphics.
> 
> I attach to this post the show_vesa. I notice some difference with the
> previous I posted here but I don't know if thias can explain that.
> 
> Any idea ?
> 
> Thanks,
> Christophe
> 
> 
> 
> _______________________________________________
> 
> Advanced Graphics
> http://community.qnx.com/sf/go/post49496
Attachment: Text display.conf 302 bytes
Michael Van Reenen
03/16/2010 9:59 AM
post49601
RE: RE: RE: Poulsbo and screen resiolution   
Does it work if they try settings refresh to 60?

Thanks
Mike

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: March 16, 2010 4:43 AM
To: advanced-graphics
Subject: Re: RE: RE: Poulsbo and screen resiolution

Hello Mike,

Thank you for the reply. They try to run at 1024x768 rgb565.

Regards,
Christophe

> 
> What resolution and color depth are they trying to run at? 
> 
> Thanks
> Mike
> 
> -----Original Message-----
> From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
> Sent: March 15, 2010 12:37 PM
> To: advanced-graphics
> Subject: Re: RE: Poulsbo and screen resiolution
> 
> Hello,
> 
> I create an image with a small demo running Photon. I run this image
> without any problem on an Atom Z530. A customer is using this image on
> an Atom Z510 and he get the error :
> /usr/photon/bin/io-graphics:
> gf_dev_attach('/dev/io-display/8086,8108,0'): gf errno 2 when starting
> io-graphics.
> 
> I attach to this post the show_vesa. I notice some difference with the
> previous I posted here but I don't know if thias can explain that.
> 
> Any idea ?
> 
> Thanks,
> Christophe
> 
> 
> 
> _______________________________________________
> 
> Advanced Graphics
> http://community.qnx.com/sf/go/post49496






_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post49570
Christophe Hannoyer
03/16/2010 11:28 AM
post49617
Re: RE: RE: RE: Poulsbo and screen resiolution   
> Does it work if they try settings refresh to 60?
Test done at 60Hz and also with 800x600 and we always get the same problem.

Thanks
Christophe
Christophe Hannoyer
03/17/2010 5:01 AM
post49702
Re: RE: RE: RE: Poulsbo and screen resiolution   
Hi,

> > Does it work if they try settings refresh to 60?
> Test done at 60Hz and also with 800x600 and we always get the same problem.
Any other suggestions?

Also at the end the customer want to use a display with 720x400, H=31.46kHz and V=70Hz
I assume this will not work if I look to the driver documentation. Is there any change to get this mode working?

Thanks
Christophe
Michael Van Reenen
03/17/2010 3:54 PM
post49789
RE: RE: RE: RE: Poulsbo and screen resiolution   
Thanks for the additional info.  It doesn't appear then that the failure
is caused by the same issue. (BIOS not providing the mode).   At this
time I can't say what may be the issue.

There is a pre-release version of our next release (6.5) available from
the QNX download site.  There is now an option that can be specified to
devg-poulsbo.so to try to directly configure the SDVO output (rather
than rely on the BIOS)

http://www.qnx.com/download/group.html?programid=20564

If you're able you may want to try this version/option to see if it
makes any difference.   At minimum you'd want this functionality to try
the 720x400 mode below (unless it happens to be in the video BIOS)
 



-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: March 17, 2010 5:01 AM
To: advanced-graphics
Subject: Re: RE: RE: RE: Poulsbo and screen resiolution

Hi,

> > Does it work if they try settings refresh to 60?
> Test done at 60Hz and also with 800x600 and we always get the same
problem.
Any other suggestions?

Also at the end the customer want to use a display with 720x400,
H=31.46kHz and V=70Hz I assume this will not work if I look to the
driver documentation. Is there any change to get this mode working?

Thanks
Christophe






_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post49702
Christophe Hannoyer
03/18/2010 5:05 AM
post49807
Re: RE: RE: RE: RE: Poulsbo and screen resiolution   
Hi,

Yes I can run test with 6.5 M8.
Can you please give me this option and all options supported by the driver? Because I don't found it with 'use devg-
poulsbo.so'.

Thanks,
Christophe
Michael Van Reenen
03/18/2010 10:05 AM
post49837
RE: RE: RE: RE: RE: Poulsbo and screen resiolution   
The option in particular is 'directsdvo=1'.   The options are specified
and listed in the poulsbo.conf configuration file.   I believe this gets
installed to /usr/photon/config by default.
 

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: March 18, 2010 5:06 AM
To: advanced-graphics
Subject: Re: RE: RE: RE: RE: Poulsbo and screen resiolution

Hi,

Yes I can run test with 6.5 M8.
Can you please give me this option and all options supported by the
driver? Because I don't found it with 'use devg-poulsbo.so'.

Thanks,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post49807
Christophe Hannoyer
03/31/2010 4:34 AM
post50906
Re: RE: RE: RE: RE: Poulsbo and screen resiolution   
Hello,

> There is a pre-release version of our next release (6.5) available from
> the QNX download site.  There is now an option that can be specified to
> devg-poulsbo.so to try to directly configure the SDVO output (rather
> than rely on the BIOS)

I run some test with 6.5 M8 and I didn't success to use this driver. When I install the system from the DVD when the 
video should start I get nothing on the screen.

There is the possibility to try this version of the driver on 6.4.1 system?

Thanks,
Christophe
Michael Van Reenen
04/01/2010 2:16 PM
post51064
RE: RE: RE: RE: RE: Poulsbo and screen resiolution   

The 6.5 devg may not work on 6.4.1 due to some changes in symbols.

There was a problem found and recentlty fixed with the 6.5
devg-poulsbo.so that sounds like what you are seeing below.   A new
version of 6.5 (M9) is supposed to be posted soon I believe but don't
know the specific date so keep a look out at the download section.




-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: March 31, 2010 4:35 AM
To: advanced-graphics
Subject: Re: RE: RE: RE: RE: Poulsbo and screen resiolution

Hello,

> There is a pre-release version of our next release (6.5) available 
> from the QNX download site.  There is now an option that can be 
> specified to devg-poulsbo.so to try to directly configure the SDVO 
> output (rather than rely on the BIOS)

I run some test with 6.5 M8 and I didn't success to use this driver.
When I install the system from the DVD when the video should start I get
nothing on the screen.

There is the possibility to try this version of the driver on 6.4.1
system?

Thanks,
Christophe



______________________________________________
Advanced Graphics
http://community.qnx.com/sf/go/post50906
Christophe Hannoyer
04/07/2010 3:12 AM
post51248
Re: RE: RE: RE: RE: RE: Poulsbo and screen resiolution   
Hi,


> A new
> version of 6.5 (M9) is supposed to be posted soon I believe but don't
> know the specific date so keep a look out at the download section.

I see on the download pages the M9 published the 31st March (the day before your last message). This is the one 
including your last changes to this driver and that I can test?

Thanks,
Christophe
Michael Van Reenen
04/07/2010 3:23 PM
post51301
RE: RE: RE: RE: RE: RE: Poulsbo and screen resiolution   
Yes - The driver in this posting should have the latest changes. 

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: April 7, 2010 3:13 AM
To: advanced-graphics
Subject: Re: RE: RE: RE: RE: RE: Poulsbo and screen resiolution

Hi,


> A new
> version of 6.5 (M9) is supposed to be posted soon I believe but don't 
> know the specific date so keep a look out at the download section.

I see on the download pages the M9 published the 31st March (the day
before your last message). This is the one including your last changes
to this driver and that I can test?

Thanks,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post51248
Christophe Hannoyer
04/26/2010 1:29 PM
post52798
RE: Poulsbo and screen resiolution   
Hello,

I tried QNX 6.5 M9 but I'm still not able to set the redolution to 1280 x 1024.

I tried also to set 'directsdvo=1' but this don't help.

Here is what I tried after a normal installation of QNX 6.5 M9:

- login via telnet
# slay io-graphics
- Edit /etc/system/config/display.conf and add modeopts=/etc/system/config/poulsbo.conf
- (the file /etc/system/config/poulsbo.conf is the normal /usr/photon/config/poulsbo.conf with the option directsdvo=1)
# io-display -dvid=0x8086,did=0x8108
# ph

What else can I tried ?

Thanks,
Christophe
Michael Van Reenen
04/27/2010 9:16 AM
post52879
RE: Poulsbo and screen resiolution   
Below you indicate you slayed io-graphics - did you mean 'slay
io-display'?

If that's the case I don't know if there's anything else I can suggest
to easily try.   Is there any error messages in sloginfo?
 

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: April 26, 2010 1:29 PM
To: advanced-graphics
Subject: RE: Poulsbo and screen resiolution

Hello,

I tried QNX 6.5 M9 but I'm still not able to set the redolution to 1280
x 1024.

I tried also to set 'directsdvo=1' but this don't help.

Here is what I tried after a normal installation of QNX 6.5 M9:

- login via telnet
# slay io-graphics
- Edit /etc/system/config/display.conf and add
modeopts=/etc/system/config/poulsbo.conf
- (the file /etc/system/config/poulsbo.conf is the normal
/usr/photon/config/poulsbo.conf with the option directsdvo=1) #
io-display -dvid=0x8086,did=0x8108 # ph

What else can I tried ?

Thanks,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post52798
Christophe Hannoyer
04/27/2010 10:16 AM
post52892
Re: RE: Poulsbo and screen resiolution   
Hi,

> Below you indicate you slayed io-graphics - did you mean 'slay
> io-display'?
Yes it is. io-display and not io-graphics.

> If that's the case I don't know if there's anything else I can suggest
> to easily try.   Is there any error messages in sloginfo?
Nothing special in sloginfo :

Test @ 1024x768:
# slay io-display
# io-display -vv -dvid=0x8086,did=0x8108 -c /etc/system/config/display1024x768.conf
# vsync
Number of displays: 1
Display 0: 1024X768, refresh = 60Hz
Number of layers: 5
 --> here I get the application running on the display and I stop with Ctrl-C
# sloginfo -c
Time             Sev Major Minor Args
Dec 12 01:53:47    6     8     0 VGA primary : bus 0x0 dev/func 0x10
Dec 12 01:53:47    6     8     0 Found 1 PCI/AGP display devices
Dec 12 01:53:47    6     8     0 pci_init: found PCI device 8086:8108
Dec 12 01:53:56    6     8     0 Primary active: 0 10 7
#

Test @ 1280x1024:
# slay io-display
# io-display -vv -dvid=0x8086,did=0x8108 -c /etc/system/config/display1280x1024.conf
# vsync
gf_dev_attach() failed
# sloginfo -c
Time             Sev Major Minor Args
Dec 12 01:55:54    6     8     0 VGA primary : bus 0x0 dev/func 0x10
Dec 12 01:55:54    6     8     0 Found 1 PCI/AGP display devices
Dec 12 01:55:54    6     8     0 pci_init: found PCI device 8086:8108
Dec 12 01:55:56    6     8     0 Primary active: 0 10 7
#

Here you can see the vsync failed and nothing more in the sloginfo. Is there any way to make the poulsbo driver himself 
more versbose?

Thanks,
Christophe
Michael Van Reenen
04/29/2010 3:30 PM
post53220
RE: RE: Poulsbo and screen resiolution   
Unfortunately there is no additional debug information available with
the driver.
This is not an issue we've come across with systems here so to proceed
further you'll likely need to consult with your sales rep for options. 

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: April 27, 2010 10:17 AM
To: advanced-graphics
Subject: Re: RE: Poulsbo and screen resiolution

Hi,

> Below you indicate you slayed io-graphics - did you mean 'slay 
> io-display'?
Yes it is. io-display and not io-graphics.

> If that's the case I don't know if there's anything else I can suggest
> to easily try.   Is there any error messages in sloginfo?
Nothing special in sloginfo :

Test @ 1024x768:
# slay io-display
# io-display -vv -dvid=0x8086,did=0x8108 -c
/etc/system/config/display1024x768.conf
# vsync
Number of displays: 1
Display 0: 1024X768, refresh = 60Hz
Number of layers: 5
 --> here I get the application running on the display and I stop with
Ctrl-C # sloginfo -c
Time             Sev Major Minor Args
Dec 12 01:53:47    6     8     0 VGA primary : bus 0x0 dev/func 0x10
Dec 12 01:53:47    6     8     0 Found 1 PCI/AGP display devices
Dec 12 01:53:47    6     8     0 pci_init: found PCI device 8086:8108
Dec 12 01:53:56    6     8     0 Primary active: 0 10 7
#

Test @ 1280x1024:
# slay io-display
# io-display -vv -dvid=0x8086,did=0x8108 -c
/etc/system/config/display1280x1024.conf
# vsync
gf_dev_attach() failed
# sloginfo -c
Time             Sev Major Minor Args
Dec 12 01:55:54    6     8     0 VGA primary : bus 0x0 dev/func 0x10
Dec 12 01:55:54    6     8     0 Found 1 PCI/AGP display devices
Dec 12 01:55:54    6     8     0 pci_init: found PCI device 8086:8108
Dec 12 01:55:56    6     8     0 Primary active: 0 10 7
#

Here you can see the vsync failed and nothing more in the sloginfo. Is
there any way to make the poulsbo driver himself more versbose?

Thanks,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post52892
Christophe Hannoyer
04/30/2010 3:50 AM
post53269
Re: RE: RE: Poulsbo and screen resiolution   
Hello,

> Unfortunately there is no additional debug information available with
> the driver.
Ok.

> This is not an issue we've come across with systems here so to proceed
> further you'll likely need to consult with your sales rep for options. 
There is already the same system loan from your company in your local office. I don't know you have the opportunity to 
run a short test on it. You can ask to Sönke Nielsen he know about that system.
If it's not possible then we will see later.

That you for the help and best regards,
Christophe
Michael Van Reenen
05/03/2010 3:12 PM
post53448
RE: RE: RE: Poulsbo and screen resiolution   
Unfortunately I'm located in our Canadian office.   It probably best for you to follow up with the local office to try 
and escalate if this is an urgent issue.

Regards
Mike 

-----Original Message-----
From: Christophe Hannoyer [mailto:community-noreply@qnx.com] 
Sent: April 30, 2010 3:50 AM
To: advanced-graphics
Subject: Re: RE: RE: Poulsbo and screen resiolution

Hello,

> Unfortunately there is no additional debug information available with 
> the driver.
Ok.

> This is not an issue we've come across with systems here so to proceed 
> further you'll likely need to consult with your sales rep for options.
There is already the same system loan from your company in your local office. I don't know you have the opportunity to 
run a short test on it. You can ask to Sönke Nielsen he know about that system.
If it's not possible then we will see later.

That you for the help and best regards,
Christophe



_______________________________________________

Advanced Graphics
http://community.qnx.com/sf/go/post53269
12Next

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems